140kW Biogas Genset,Industrial Methane Generator Set,China Biogas Genset Supplier

Recommended Operation Conditions

1. CH4 Content of Gas ≥ 45%
2. Gas Pressure ≥ 3 kPa
3. Calorific Value ≥ 16 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 460 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃

Advantages & Features

1. Our 140kW biogas genset is equipped with reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller
2. This industrial methane generator set enjoys advanced lean-burn technology
3. Prompt dynamic response similar to diesel genset
4. Excellent power generation efficiency
5. This 140kW biogas genset is adaptable for a wide range of gas pressure
6. Humanized manual, semi-auto and full-auto operation modes

Specification & Configuration

Model	AMC140GF-PZ
Prime Power	140 kW (175 kVA)
Rated Voltage	230/400 V
Rated Current	252.6 A
Rated Frequency	50 or 60 Hz
Power Factor	0.8
Gas Consumption	0.49 Nm³/kWh
Weight	1,750 kgs
Overall Size (L × W × H)	2,800 × 1,150 × 1,680 mm
Engine
Brand	CNHTC (Steyr & AVL Tech.)
Model	WT615
Type	6-cylinder, 4-stroke, turbocharged
Displacement	9.726 L
Compression Ratio	10.5
Ignition	Electric control, independent ignition
Fuel Control	Lean-burn, closed-loop control
Speed Control	Electric control
Rated Speed	1500rpm
Conversion Efficiency	37.1%
Alternator
Brand	Mecc Altea
Model	ECO38-1SN/4
Type of Excitation System	Brushless with AVR
Connection Type	3-Phase, 4-Line
Conversion Efficiency	93%
Controller
Brand	DEIF
Model	AGC222
Type	Manual control, semi-auto control or full-auto control
Others
Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.

All specifications are subject to change without prior notice.

50kW Lantoky® Machine Genset
1. CH4 Content of Gas ≥ 45% 2. Gas Pressure ≥ 3 kPa 3. Calorific Value ≥ 16 MJ/m³ 4. H2S Content of Gas ≤ 20 mg/m³ 5. Total Sulphur Content of Gas ≤ 460 mg/m³...