750kW Natural Gas Generator Set,Industrial Gas Genset

Recommended Operation Conditions

1. CH4 Content of Gas ≥76%
2. Gas Pressure ≥ 3 kPa
3. Calorific Value ≥ 32 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 460 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃

Advantages & Features

1. This 750kW natural gas generator set is equipped with reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller
2. This industrial gas genset enjoys advanced lean-burn technology
3. Prompt dynamic response similar to diesel genset
4. Excellent power generation efficiency
5. This 750kW natural gas generator set is adaptable for a wide range of gas pressure
6. Humanized manual, semi-auto and full-auto operation modes

Specification & Configuration

750kW Natural Gas Genset
Model	AMC750GFJ4-3PN
Prime Power	750 kW (937.5 kVA)
Rated Voltage	230/400 V
Rated Current	1,353 A
Rated Frequency	50 or 60 Hz
Power Factor	0.8
Gas Consumption	0.28 Nm³/kWh
Operating Weight	12,500 kgs
Overall Size (L × W × H)	7,600 × 3,000 × 2,400 mm
Engine
Brand	CNHTC (Steyr & AVL Tech.)
Model	T12 × 3
Type	6-cylinder, 4-stroke, turbocharged
Displacement	11.596L × 3
Compression Ratio	11
Ignition	Electric control, independent ignition
Fuel Control	Lean-burn, closed-loop control
Speed Control	Electric control
Rated Speed	1500 rpm
Conversion Efficiency	40%
Alternator
Brand	Mecc Altea
Model	ECO38-2LN/4
Type of Excitation System	Brushless with AVR
Connection Type	3-Phase, 4-Line
Conversion Efficiency	93.4%
Controller
Brand	DEIF
Model	AGC222
Type	Manual control, semi-auto control or full-auto control
Others
Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.