Related Searches: 800kW Natural Gas Genset | 800kW Natural Gas Generator | 800kW Gas Genset | 800kW Natural Gas Generator Set
Product List

800kW AMICO Natural Gas Genset

Recommended Operation Conditions

1. CH4 Content of Gas ≥ 76%
2. Gas Pressure ≥3 kPa
3. Calorific Value ≥ 32 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 460 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃

Advantages & Features

1. Our 800kW gas powered gnerator is equipped with reliable MTU engine, Mecc Altea alternator and DEIF controller
2. This commercial gas genset enjoys advanced lean-burn technology
3. Prompt dynamic response similar to diesel genset
4. Excellent power generation efficiency
5. This 800kW gas powered gnerator is adaptable for a wide range of gas pressure
6. Humanized manual, semi-auto and full-auto operation modes

Specification & Configuration

800kW Gas Powered Genset

Model AMC800GFJ4-PN
Prime Power 800 kW (1,000 kVA)
Rated Voltage 230/400 V
Rated Current 1,443.2 A
Rated Frequency 50 or 60 Hz
Power Factor 0.8
Gas Consumption 0.27 Nm³/kWh
Weight 11,500 kgs
Overall Size (L × W × H) 6,058 × 2,438 × 2,591 mm

Engine

Brand MTU
Model 12V165
Type 12-cylinder, 4-stroke, turbocharged
Displacement 47.5 L
Compression Ratio 11
Ignition Electric control, independent ignition
Fuel Control Lean-burn, closed-loop control
Speed Control Electric control
Rated Speed 1500 rpm
Conversion Efficiency 41%

Alternator

Brand Mecc Altea
Model ECO43-1LN
Type of Excitation System Brushless with AVR
Connection Type 3-Phase, 4-Line
Conversion Efficiency 94.2%

Controller

Brand DEIF
Model AGC222
Type Manual control, semi-auto control or full-auto control

Others

Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.

All specifications are subject to change without prior notice.


Related Products