200kW Coal Mine Gas Generator Set,Commercial Gas Genset,China Coalbed Gas Gensets Manufacturer

Recommended Operation Conditions

1. CH4 Content of Gas ≥ 10%
2. Gas Pressure ≥ 3 kPa
3. Calorific Value ≥ 3.5 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 200 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃

Advantages & Features

1. Our 200kW coal mine gas generator set is equipped with reliable Steyr & AVL Tech. engine, Mecc Altea alternator and DEIF controller
2. This commercial gas genset enjoys advanced lean-burn technology
3. Prompt dynamic response similar to diesel genset
4. Excellent power generation efficiency
5. This 200kW coal mine gas generator set is adaptable for a wide range of gas pressure
6. Humanized manual, semi-auto and full-auto operation modes

Specification & Configuration

Model	AMC200GFJ-RM
Prime Power	200 kW (250 kVA)
Rated Voltage	230/400 V
Rated Current	360.8 A
Rated Frequency	50 or 60 Hz
Power Factor	0.8
Gas Consumption	1.18 Nm³/kWh
Weight	1,950 kgs
Overall Size (L × W × H)	2,900 × 1,150 × 1,720 mm
Engine
Brand	CNHTC (Steyr & AVL Tech.)
Model	T12
Type	6-cylinder, 4-stroke, turbocharged
Displacement	11.596L
Compression Ratio	11
Ignition	Electric control, independent ignition
Fuel Control	Lean-burn, closed-loop control
Speed Control	Electric control
Rated Speed	1500 rpm
Conversion Efficiency	40%
Alternator
Brand	Mecc Altea
Model	ECO38-1LN/4
Type of Excitation System	Brushless with AVR
Connection Type	3-Phase, 4-Line
Conversion Efficiency	93.4%
Controller
Brand	DEIF
Model	AGC222
Type	Manual control, semi-auto control or full-auto control
Others
Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.

200kW AMICO Natural Gas Genset

Recommended Operation Conditions

Advantages & Features

Specification & Configuration

Engine

Alternator

Controller

Others

All specifications are subject to change without prior notice.