2000kW Natural Gas Genset,Large Power Generator Set,China Gas Gensets Supplier

Recommended Operation Conditions

1. CH4 Content of Gas ≥ 76%
2. Gas Pressure ≥ 3 kPa
3. Calorific Value ≥ 32 MJ/m³
4. H2S Content of Gas ≤ 20 mg/m³
5. Total Sulphur Content of Gas ≤ 460 mg/m³
6. Altitude ≤ 4,000 m
7. -25℃ ≤ Ambient Temperature ≤ +50℃

Advantages & Features

1. Our 2000kW natural gas genset is equipped with reliable Deutz engine, Mecc Altea alternator and DEIF controller
2. This large power generator set enjoys advanced lean-burn technology
3. Prompt dynamic response similar to diesel genset
4. Excellent power generation efficiency
5. This 2000kW natural gas genset is adaptable for a wide range of gas pressure
6. Humanized manual, semi-auto and full-auto operation modes

Specification & Configuration

2000kW Natural Gas Genset
Model	AMC2000GFJ4-PN
Prime Power	2,000 kW (2,500 kVA)
Rated Voltage	230/400 V
Rated Current	3,608 A
Rated Frequency	50 or 60 Hz
Power Factor	0.8
Gas Consumption	0.27Nm³/kWh
Weight	19,600 kgs
Overall Size (L × W × H)	12,192 × 2,438 × 2,591 mm
Engine
Brand	Deutz
Model	TBG620V20
Type	20-cylinder, 4-stroke, turbocharged
Displacement	88.5L
Compression Ratio	11
Ignition	Electric control, independent ignition
Fuel Control	Lean-burn, closed-loop control
Speed Control	Electric control
Rated Speed	1500 rpm
Conversion Efficiency	40%
Alternator
Brand	Mecc Altea
Model	ECO46-2L
Type of Excitation System	Brushless with AVR
Connection Type	3-Phase, 4-Line
Conversion Efficiency	95%
Controller
Brand	DEIF
Model	AGC222
Type	Manual control, semi-auto control or full-auto control
Others
Pedestal, radiator, air filter, muffler, battery and gas pressure reducer are included.
Soundproof equipment, engine oil, coolant and output cable are not included.

All specifications are subject to change without prior notice.

50kW Lantoky® Machine Genset
1. CH4 Content of Gas ≥76% 2. Gas Pressure ≥3 kPa 3. Calorific Value ≥ 32 MJ/m³ 4. H2S Content of Gas ≤ 20 mg/m³ 5. Total Sulphur Content of Gas ≤ 460 mg/m³...